When you need a reliable flat cable connector, the wrong pitch, pin count, or wire specification can cause poor contact, installation problems, and unnecessary redesigns. For IDC applications, you need to match the connector with the cable structure, pitch, current requirement, and operating environment before placing an order.
Shenzhen JYE Technology Co., LTD manufactures custom wiring harnesses and connector solutions, including IDC 2.0 flat cable products. Its manufacturing capabilities support different pin configurations and wire specifications for applications in industrial equipment, consumer electronics, automotive electronics, medical equipment, and other connection systems.
What Is an IDC 2.0 Flat Cable Connector?
An IDC 2.0 flat cable connector is designed to work with flat or ribbon-style cables using a 2.0mm pitch. The compact arrangement allows multiple conductors to be connected in a controlled, space-efficient configuration.
For your project, you should confirm the connector and cable specifications together rather than selecting a connector based only on pin count.
The JYE IDC 2.0 flat cable specification includes:
- Pitch: 2.0mm
- Pins: 6–40 pins
- Wire: 28–30 AWG
- Rated current: 1.5A
- Contact resistance: 30MΩ max.
- Insulation resistance: 1000MΩ min.
- Withstanding voltage: 250V AC/DC
- Operating temperature: -20°C to +105°C
- Unit price: approximately US$0.25–0.99
These specifications make the cable suitable for compact internal wiring and signal connection applications where consistent conductor spacing and controlled assembly are important.
How to Select the Right Flat Cable Connector
Choosing the right connector starts with your actual application requirements. You can use the following steps to reduce compatibility issues before production.
1. Confirm the 2.0mm Pitch
First, verify that your equipment requires a 2.0mm pitch flat cable connector. Pitch determines the center-to-center distance between adjacent contacts, so an incorrect pitch can make the connector incompatible with your PCB or mating component.
2. Match the Pin Count
JYE supports 6 to 40 pins, allowing you to select a configuration according to your circuit design.
For example, a compact control board may require a 6-pin or 8-pin connection, while a larger interface may need 20, 26, 34, or 40 pins.
3. Check Wire Gauge
Wire size directly affects electrical performance and mechanical compatibility. The IDC 2.0 cable supports 28–30 AWG, giving you practical options for different wiring requirements.
You should confirm the actual conductor size with your connector specification before mass production.
4. Verify Electrical Requirements
For applications requiring stable electrical performance, check the rated current, contact resistance, insulation resistance, and voltage rating.
The JYE specification provides a 1.5A rated current, 1000MΩ minimum insulation resistance, and 250V AC/DC withstand voltage.
5. Consider the Operating Environment
Temperature and installation conditions can affect cable reliability. The specified operating range of -20°C to +105°C gives you a clear reference when evaluating the cable for equipment installed in variable-temperature environments.
Flat Cable Connector vs. Standard Wire Harness
Your choice depends on how much space, wiring density, and assembly flexibility your equipment requires.
| Feature | IDC 2.0 Flat Cable | Conventional Wire Harness |
|---|---|---|
| Cable structure | Flat/ribbon | Individual wires or grouped wires |
| Pitch | 2.0mm | Application dependent |
| Pin options | 6–40 pins | Highly customizable |
| Wire size | 28–30 AWG | Application dependent |
| Space efficiency | High | Varies |
| Multi-conductor routing | Convenient | More complex |
| Typical use | PCB and internal signal connections | Power, control, automotive and industrial wiring |
| Customization | Pin and cable configuration | Extensive harness customization |
If your PCB or equipment uses a compact multi-contact interface, an IDC-style flat cable can simplify routing and assembly. In contrast, a custom wire harness may be more suitable when you need different terminals, branches, protective sleeves, or complex routing.
Where IDC 2.0 Flat Cables Are Used
You can consider an IDC flat cable connector when your equipment needs organized multi-conductor connections in a limited space.
Typical applications include:
- Industrial control equipment
- Electronic control boards
- Consumer electronics
- Test and measurement equipment
- Medical equipment
- Automotive electronic systems
- Internal equipment wiring
- PCB interface applications
For example, an industrial controller may use a multi-pin flat cable to connect a PCB to an internal control module. A compact electronic device can also benefit from the flat structure because it helps keep multiple conductors aligned during assembly.
Why Work With JYE Technology?
Shenzhen JYE Technology Co., LTD has more than 15 years of experience in wire harness and connector manufacturing, with a 5,000m² production facility and 100+ professionals.
The company combines connector manufacturing with custom wiring harness capabilities, allowing you to discuss the cable and connection system with one supplier instead of coordinating separate vendors.
JYE also states that its products comply with RoHS, UL, CE, and REACH requirements. Its production capabilities include automated wire cutting and crimping, laser marking, and customized cable assembly.
For customers with specific technical requirements, JYE can support product discussions around:
- Pin configuration
- Cable length
- Wire gauge
- Connector configuration
- Custom harness assembly
- Application-specific requirements
- Production and quality-control requirements
FAQ
1. What is a 2.0mm flat cable connector?
A 2.0mm flat cable connector is designed for flat or ribbon cables with a 2.0mm contact pitch. It is commonly used for compact multi-conductor connections between PCBs, electronic modules, and internal equipment components.
2. How many pins can the JYE IDC 2.0 cable support?
The listed IDC 2.0 flat cable supports 6 to 40 pins. You should select the pin count according to your circuit and mating connector requirements.
3. Can I order a custom flat cable connector solution?
Yes. JYE specializes in customized wiring harnesses and connector solutions. You can provide your required pitch, pin count, wire gauge, cable length, connector configuration, and application requirements for evaluation.
Conclusion
Selecting the right flat cable connector requires more than checking the connector appearance. You should match the 2.0mm pitch, 6–40 pin configuration, 28–30 AWG wire, 1.5A rated current, electrical specifications, and operating temperature with your actual equipment requirements.
With more than 15 years of manufacturing experience, a 5,000m² facility, 100+ professionals, and RoHS, UL, CE, and REACH compliance, Shenzhen JYE Technology Co., LTD can support your IDC cable and customized connector requirements from specification review through production.
Request a Custom IDC 2.0 Cable
Send JYE your pin count, cable length, wire gauge, connector requirements, quantity, and application. The engineering team can review your requirements and help determine a suitable IDC 2.0 flat cable configuration and quotation.
Add comment